Product search

 

 

PP WHITE TC 60 / RC18 / HD 705N/RC18/286415788047859

Download as pdf

Date07.05.2019 SI
ProductPP WHITE TC 60 / RC18 / HD 70
Sales Code5N/RC18/28
EAN6415788047859
Product useProduct designed for less demanding durables labelling applications that still need good adhesion on various surfaces and print resistance against chemicals, UV-light and moisture.
Typical technical values
FacePP WHITE TC 60
ProductA white, glossy, biaxially oriented, cavitated, top-coated polypropylene film.
Substance46g/m²DIN 53352
Caliper61µmDIN 53370
Tensile strength MD70.0N/mm²DIN 53455
Tensile strength CD165.0N/mm²DIN 53455
Opacity80%DIN 53146/1
Gloss90%DIN 67530/160°
PrintabilitySuitable for flexography, screen and offset printing methods, as well as Xeikon digital label presses. Thermal transfer is possible with selected wax-resin and resin ribbons.
AdhesiveRC18
TypeClear permanent adhesive.
CompositionRadiation-cured UV-Acrylic.
Tack20N/25mmFTM 9(on glass)
Peel 180°23N/25mmFTM 1(on glass)
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper140 µm
Minimum labelling temperature5 °C
Service temperature-40 °C to 100 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Adhesive coatweight25 g/m²
AdhesionDue to the fact that the adhesive needs a certain time to reach its final adhesion, we recommend waiting at least 24h (better 72h) after dispensing the label to the substrate before proceeding with any performance tests. Test Conditions: 23°C and 50% RH. FTM1: 180º Peel Adhesion (300 mm/min) with 72 h dwell time.
Surface[N/25mm]
Stainless Steel21
ABS18
Polycarbonate25
Polypropylene18
HDPE12
PA616
PA6 + GF3015
Polyester17
Lacquered panel15
Powder coated panel11
Chemical resistanceTest Conditions:Dwell on glass plate: 24 h 23°C and 50% RH, Immersion in chemical: 4 h 23°C and 50% RH.
ChemicalVisual AppearanceEdge Penetration (mm)
Brake Fluidno change0
Engine Oilno change0
Dieselno change0
Distilled Waterno change0
Dish Washing Agentno change0
Bleachno change0
Thermal Transfer Ribbons(included in File MH26760): Armor AXR 600, AXR 7+, AXR; limak SP-330; Pelikan T016; Ricoh B110C
Approvals
UL and CSA complianceUL recognized acc. to UL969 File-No.: MH26760.
ULFile MH26760: Additional conditions: D - Occasional exposure to Detergents G - Occasional exposure to Gasoline splashing O - Occasional exposure to Lubricating Oil
Application SurfaceMax Temp [°C]Min Temp [°C]Indoor UseOutdoor UseAdditional conditions
Alkyd paint (AK PT)80-40x-D, O, G
Aluminium (AL)80-40x-D, O, G
Stainless steel (SS)80-40x-D, O, G
Acrylonitrile butadiene styrene (ABS)80-40x-D, O, G
Polyethylene (PE)80-x--
Polypropylene (PP)80-x--
Polystyrene (PS)80-40x-D, O
Typical valuesThe listed technical data are typical values and give indications about the performance of the material only. They are not intended for specification purpose.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Small roll1000/500
Stock1000/0

 Do you know our services?

 Components

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials