Поиск продукции

 

 

PET XTRA M SILVER TC 50 / RC15 / HD 70EVR/RC15/286415788226377

Download as pdf

Date08.05.2019 SI
ProductPET XTRA MATT SILVER TC 50 / RC15 / HD 70
Sales CodeEVR/RC15/28
EAN6415788226377
Product useProduct designed for durable labelling applications on surfaces such as steel, glass and ABS. It will perform for the lifetime of the labelled product with very good adhesion and very good print resistance against chemicals, UV-light, heat and moisture.
Typical technical values
FacePET XTRA M SILVER TC 50
ProductSilver, matt top-coated polyester film.
Substance73g/m²ISO 536
Caliper53µmISO 527-1-2
Tensile strength MD188.0N/mm²ASTM D882A
Tensile strength CD230.0N/mm²ASTM D882A
Gloss19%DIN 67530/160º
PrintabilitySuitable for flexography, screen and offset printing methods. Special inks designed for non-absorbent materials should be used.
AdhesiveRC15
TypeClear permanent adhesive.
CompositionRadiation-cured UV-Acrylic.
Tack20N/25mmFTM 9(on glass)
Peel 180°25N/25mmFTM 1(on glass)
Regulatory infoThe adhesive RC15 is in compliance with the demands of the Code of Federal Regulations, Food and Drug Administration (FDA) , 21 CFR Ch. I (April 1, 2012 edition) § 175.105 and § 175.125.
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper130 µm
Minimum labelling temperature5 °C
Service temperature-40 °C to 150 °C
Shelf lifeFrom date of manufacture: 12 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Coater1000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме