Поиск продукции

 

 

PE CLEAR RH 100 / RH1 / HD 70BJL/RH01/286415788101933

Download as pdf

Date08.05.2019 SI
ProductPE CLEAR RH 100 / RH1 / HD 70
Sales CodeBJL/RH01/28
EAN6415788101933
Product useClear, corona-treated PE film, designed for the labeling of various containers used in the industrial chemical area. Especially for applications where a clear face in combination with a hotmelt is required, which offers a certain tack and adhesion to various PE and PP surfaces.
Typical technical values
FacePE CLEAR RH 100
ProductTransparent, uncoated polyethylene film
Substance90g/m²DIN 53352
Caliper96µmDIN 53370
Tensile strength MD16.0N/mm²DIN 53455
Tensile strength CD16.0N/mm²DIN 53455
PrintabilitySuitable for flexography, screen and offset printing methods. Corona treatment should be applied on press for optimal ink adhesion. Printing is recommended within 4 months of delivery.
AdhesiveRH1
TypeGeneral purpose, strong permanent adhesive.
CompositionRubber, hotmelt.
Tack25N/25mmFTM 9
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper169 µm
Minimum labelling temperature-5 °C
Service temperature-40 °C to 50 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
LimitationsThis adhesive is not clear and will reduce the overall clarity of the label in application. It also has limited UV light resistance and could turn yellow in combination with this clear face material.
Product InformationThere is a tendency in all PE film for slight machine-direction shrinkage as the film relaxes after die-cutting.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Coater1000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме