Поиск продукции

 

 

TH DURABLE P 300 / RH1 / HONEY GLASSINE 65DB/RH01/036415788045787

Download as pdf

Date07.05.2019 SI
ProductTHERMAL DURABLE P 300 / RH1 / HONEY GLASSINE 65
Sales CodeDB/RH01/03
EAN6415788045787
Product useThis product offers good scratch and smear resistance to environment conditions like oil, moisture, plasticizers, UV-light and heat (up to 95 °C) thanks to thermal durable BPA-free face stock. And together with rubber hotmelt this products provides a durable solution for labelling in logistics and transport end-use, especially in applications where VIP printing must remain readable for several months.
Typical technical values
FaceTHERMAL DURABLE P 300
ProductA top and reverse side barrier coated paper with a high sensitivity thermal coating produced totally without BPA-based chemistry.
Substance79g/m²ISO 536
Caliper81µmISO 534
Tensile strength MD3.6kN/mISO 1924/1
Tensile strength CD1.6kN/mISO 1924/1
Brightness85%ISO 2470/2min
Smoothness300Bekk secISO 5627min
Imaging colourBlack
ScanningVisible red light.
Optical densityDirect thermal print 1.20 (min)
PrintabilitySuitable for flexography solvent based, water based, UV Flexo, letterpress, offset, UV varnishing. Qualified by Xeikon for their Xeikon 3030, 3000 and 3300 digital presses. Thermal direct.
AdhesiveRH1
TypeGeneral purpose, strong permanent adhesive.
CompositionRubber, hotmelt.
Tack25N/25mmFTM 9
BackingHONEY GLASSINE 65
ProductYellow transparent glassine backing paper.
Substance57g/m²ISO 536
Caliper51µmISO 534
Tensile strength MD6.2kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency49%DIN 53147
Performance
Total caliper151 µm
Minimum labelling temperature-5 °C
Service temperature-40 °C to 50 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationFor all types of printers upto 300mm/s. Printed labels are guaranteed for 1 year if stored in the above conditions. The face has a slight tendency to discolour, but this does not affect scannability of the barcode.
Approvals
Approvals and certificationsPlease see the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Stock2000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме