Поиск продукции



VELLUM TTR-FSC / RH1 / HONEY GLASSINE 65GNF/RH01/036415788291559

Download as pdf

Date07.05.2019 SI
Sales CodeGNF/RH01/03
Product useProduct designed for multipurpose labelling in logistics and retail applications requiring thermal transfer printability, good convertability and superb initial tack.
Typical technical values
ProductSurface sized woodfree supercalandered paper, which is made from FSC™ Mix Credit-certified pulp.
Substance70g/m²ISO 536
Caliper70µmISO 534
Tensile strength MD4.9kN/mISO 1924-3
Tensile strength CD2.5kN/mISO 1924-3min
Brightness106%ISO 2470
Roughness2.7µmISO 8791-4PPS 10
Opacity88%ISO 2471
CIE Whiteness150%ISO 11475
PrintabilitySuitable for flexography, offset, letterpress, thermal transfer and dot-matrix.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
TypeGeneral purpose, strong permanent adhesive.
CompositionRubber, hotmelt.
Tack25N/25mmFTM 9
ProductYellow transparent glassine backing paper.
Substance57g/m²ISO 536
Caliper51µmISO 534
Tensile strength MD6.2kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency49%DIN 53147
Total caliper140 µm
Minimum labelling temperature-5°C
Service temperature-40°C to 50°C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Product InformationDesigned for a wide range of industrial applications requiring bar codes or text printed with thermal transfer ribbons. Recommended for use in cold environment, particularly if the application surface is moist or if very high initial adhesion is required. Very good adhesion to non-polar surfaces and pre-testing is required for adhesive surface printing.
Approvals and certificationsFor food packaging applications, please contact your local sales representative for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)

 Наши сервисы?


 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме