Поиск продукции



SYNTHERMAL CLEAR PLUS / 149DF / HD 70FSB/149D/286415788250952

Download as pdf

Date06.05.2019 SI
Sales CodeFSB/149D/28
Product useProduct designed for variety of food labelling applications. This clear, direct thermal printable label material provides excellent see-through and good convertibility properties.
Typical technical values
ProductA top side barrier coated transparent film with a standard sensitivity thermal coating produced without BPA or BPS-based chemistry.
Substance78g/m²ISO 536
Caliper56µmISO 534
Imaging colourBlack
ScanningVisible red light
PrintabilitySuitable for UV and water based flexo, letterpress, offset. Direct thermal.
Haze25.0%ASTM D1003
TypeFreezer permanent adhesive.
CompositionAcrylic, water borne.
Tack12N/25mmFTM 9
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Total caliper130 µm
Minimum labelling temperature-20 °C
Service temperature-40 °C to 80 °C
Storage recommendationsStore at constant temperature (20°C, RH 50%) in the dark. Damp or hot conditions should be avoided.
Shelf lifeFrom date of manufacture: 12 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Additional infoCorona treatment prior pre-printing is recommended.
Approvals and certificationsPlease see the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)

 Наши сервисы?


 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме