Поиск продукции

 

 

PP CLEAR FTC 50 / RC10 / HD 70EYN/RC10/286415788254516

Download as pdf

Date08.05.2019 SI
ProductPP CLEAR FTC 50 / RC10 / HD 70
Sales CodeEYN/RC10/28
EAN6415788254516
Product useMulti-purpose product designed for rigid containers when good long term removability, clarity, UV stability and heat resistance are needed. Often used in retail and logistic applications for conveying variable information printing. The product complies with EU regulations on food safety.
Typical technical values
FacePP CLEAR FTC 50
ProductA transparent, glossy, biaxially oriented, top-coated polypropylene film.
Substance46g/m²internal
Caliper50µminternal
Tensile strength MD120MPainternal
Tensile strength CD270MPainternal
Gloss80%internal45°
PrintabilitySuitable for flexography, screen and offset printing methods. Thermal transfer is possible with selected wax-resin and resin ribbons.
AdhesiveRC10
TypeRemovable UV acrylic adhesive
CompositionRadiation-cured UV-Acrylic.
Tack min2NFTM 9
Tack max6NFTM 9
Peel min1.0N/25mmFTM 290°
Peel max3.0g/25mmFTM 290°
Regulatory infoThe adhesive RC10 is in compliance with the demands of the Code of Federal Regulations, Food and Drug Administration (FDA) , 21 CFR Ch. I (April 1, 2012 edition) § 175.105 and § 175.125.
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper122 µm
Minimum labelling temperature10 °C
Service temperature0 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Approvals
Approvals and certificationsFor food packaging applications, please contact your local sales representative for the individual Declaration of Conformance (DoC) document for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Stock1000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме