Поиск продукции

 

 

PET MATT SILVER TC 50 / RX15 / HD 70ZC/RX15/286415788218907

Download as pdf

Date06.05.2019 IMP
ProductPET MATT SILVER TC 50 / RX15 / HD 70
Description2.0 mil PET MATTE SILVER TC RX15 2.2 mil HIGH DENSITY
Sales CodeZC/RX15/28
EAN6415788218907
Product useProduct designed for high-end durable labeling applications on polar surfaces such as steel, glass and ABS with high performance throughout the lifetime of the labelled product. This matt silver label material is based on solvent free adhesive technology and provides excellent adhesion and good resistance against heat, chemicals, UV-light and moisture. Easy converting is supported by lower adhesive coat weight and high cohesion.
Typical technical values
FacePET MATT SILVER TC 50
ProductSilver, matt top-coated polyester film.
Substance71g/m²DIN 53352
Caliper51µmDIN 53370
PrintabilitySuitable for flexography, screen and offset printing methods. Special inks designed for non-absorbent materials should be used. Thermal transfer possible with selected wax-resin and resin ribbons.
AdhesiveRX15
TypeClear permanent adhesive.
CompositionCatalyst activated adhesive.
Tack30N/25mmFTM 9(on glass)
Peel 180°30N/25mmFTM 1(24h on glass)
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper130 µm
Minimum labelling temperature5 °C
Service temperature-40 °C to 150 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Adhesive coatweight25 g/m²
AdhesionDue to the fact that the adhesive needs a certain time to reach its final adhesion, we recommend waiting at least 24h (better 72h) after dispensing the label to the substrate before proceeding with any performance tests. Test Conditions: 23 °C, 50%RH FTM1 180º Peel Adhesion (300 mm/min) with 72 h dwell time.
Surface[N/25mm]
Stainless Steel22
ABS24
Polycarbonate24
Polypropylene6
HDPE12
PA620
Polyester22
Glass30
Approvals
Typical valuesThe listed technical data are typical values and give indications about the performance of the material only. They are not intended for specification purpose.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Stock460/0
Stock460/500

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме