Поиск продукции

 

 

149AT

Download as pdf

Date08.05.2019 SI
Adhesive149AT
Sales Code149A
TypeAll temperature adhesive.
CompositionAcrylic, water borne.
UseDesigned for labelling filmic food packaging in chill and ambient environment. Very good adhesion to non-polar surfaces like PE and PP plastics.
Typical technical values
Tack10N/25mmFTM 9
Labelling temperature min-5°C
Service temperature min-30°C
Service temperature max80°C
LimitationsUse on packaging with small diameter or test tubes might be restricted.
ApprovalsFor food packaging applications, please contact your local sales representative for the individual Declaration of Conformance (DoC) document for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме