Wyszukiwanie produktów

 

 

PP WHITE TC 60 / RP31 PURUS / HD 705N/R31P/286415788098479

Download as pdf

Date07.05.2019 SI
ProductPP WHITE TC 60 / RP31 PURUS / HD 70
Sales Code5N/R31P/28
EAN6415788098479
Product useProduct designed for labelling pharmaceutical packaging applications when low leachable characteristics are required. This product performs well on small diameters and curved surfaces, and on a variety of labelling substrates including Polypropylene (PP) and low-density polyethylene (LDPE).
Typical technical values
FacePP WHITE TC 60
ProductA white, glossy, biaxially oriented, cavitated, top-coated polypropylene film.
Substance46g/m²DIN 53352
Caliper61µmDIN 53370
Tensile strength MD70.0N/mm²DIN 53455
Tensile strength CD165.0N/mm²DIN 53455
Opacity80%DIN 53146/1
Gloss90%DIN 67530/160°
PrintabilitySuitable for flexography, screen and offset printing methods, as well as Xeikon digital label presses. Thermal transfer is possible with selected wax-resin and resin ribbons.
AdhesiveRP31 PURUS
TypePermanent adhesive.
CompositionAcrylic, waterborne.
Tack min12NFTM 9
Regulatory infoThis adhesive is in compliance with the demands of the Code of Federal Regulations, Food and Drug Administration (FDA), 21 CFR Ch. I (April 1, 2011 edition) 175.105. The FDA has assigned Drug Master file (DMF) number 25392, type III for RP31 Purus.
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper136 µm
Minimum labelling temperature10 °C
Service temperature-40 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationStiffness of the face material, die-cutting direction, storage conditions and the container diameter can influence to edge-lifting. Note also that heavy ink coverage and overlamination increase the stiffness of the face material.
Additional infoNeither natural rubber latex nor ruminant animal-derived materials are used in the manufacture of RP31 Purus.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Dostępność produktu

ServiceWidth (mm) / Length (m)
Stock1000/0

 Czy znasz nasze usługi?

 Komponent

 ‭(Hidden)‬ Wiadomości

 ‭(Hidden)‬ Broszury

 ‭(Hidden)‬ Powiązane materiały