Wyszukiwanie produktów



CANALIN WSA / RP30 / WHITE GLASSINE 85ATG/RP30/026415788083116

Download as pdf

Date08.05.2019 SI
Sales CodeATG/RP30/02
Product useProduct designed for wine and spirits applications. This uncoated felt-grained textured paper product is robust and stable for embossing and die-cutting of complex label shapes and the adhesive provides good adhesion to polar surfaces.
Typical technical values
ProductAn uncoated,wood-free, felt-grained, wet-strength paper that is alkali resistant and mould proof.
Substance90g/m²ISO 536
Caliper130µmISO 534
Tensile strength MD7.5kN/mISO 1924/1
Tensile strength CD3.0kN/mISO 1924/1
Opacity85%ISO 2471
PrintabilitySuitable for offset, UV flexography and silkscreen printing methods. Also suitable for hot-foil blocking and embossing.
TypePermanent adhesive
CompositionAcrylic, waterborne
Tack15N/25mmFTM 9
ProductWhite glassine woodfree backing paper.
Substance79g/m²ISO 536
Caliper69µmISO 534
Tensile strength MD8.2kN/mISO 1924
Tensile strength CD3.3kN/mISO 1924
Transparency40%DIN 53147
Total caliper220 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Product InformationThe high stiffness of the product may result in pre-dispensing, especially if there is a narrow label feed path or if the rollers inside the machine have small diameters. Reels should be wound with the label-side out. This product is not suitable for labelling of small-diameter areas such as the neck of bottles. To ensure optimal adhesion, bottles should be dry and clean during label application. This product can be used in humid conditions and ice buckets with limited performance.
Additional infoFormulation contains natural rubber latex.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Dostępność produktu

ServiceWidth (mm) / Length (m)
Small roll1000/500

 Czy znasz nasze usługi?


 ‭(Hidden)‬ Wiadomości

 ‭(Hidden)‬ Broszury

 ‭(Hidden)‬ Powiązane materiały