Produktsuche

 

 

ANTIQ INTENSIV WH WSA90 / RP30 / PET 23BS/RP30/1E6415788198117

Download as pdf

Date08.05.2019 SI
ProductANTIQUE INTENSIVE WHITE WSA 90 / RP30 / PET 23
Sales CodeBS/RP30/1E
EAN6415788198117
Product useProduct designed for wine and spirits applications with good adhesion to polar surfaces. This intense white textured laid matt paper shows a particular narrow-ribbed pattern which gives the paper a hand crafted appearance and feel. The PET liner enables higher productivity during label conversion and dispensing.
Typical technical values
FaceANTIQUE INTENSIVE WHITE WSA 90
ProductA white, wood-free, narrow-ribbed, machine- finished, wet-strength paper that is alkali resistant and mould proof.
Substance90g/m²ISO 536
Caliper123µmISO 534
Tensile strength MD6.0kN/mISO 1924/1
Tensile strength CD3.0kN/mISO 1924/1
Opacity90%ISO 2471
CIE Whiteness146%ISO 11475
PrintabilitySuitable for offset and hot-foil printing methods.
AdhesiveRP30
TypePermanent adhesive
CompositionAcrylic, waterborne
Tack15N/25mmFTM 9
BackingPET 23
ProductA clear polyester backing material.
Substance32g/m²ISO 536
Caliper23µmISO 534
Tensile strength MD4.7kN/mASTM D882
Tensile strength CD4.7kN/mASTM D882
Performance
Total caliper167 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationThe high stiffness of the product may result in pre-dispensing, especially if there is a narrow label feed path or if the rollers inside the machine have small diameters. Reels should be wound with the label-side out. This product is not suitable for labelling of small-diameter areas such as the neck of bottles. To ensure optimal adhesion, the bottles should be dry and clean during label application. This product can be used in humid conditions and ice buckets with limited performance.
Additional infoFormulation contains natural rubber latex.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)
Stock2000/0

 Kennen Sie unsere Service-Optionen?

 Komponenten

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material