Produktsuche

 

 

VOID CLEAR NO TACK TC36 / RP62 EU / HD 70GIY/R62E/286415788296448

Download as pdf

Date06.05.2019 SI
ProductVOID CLEAR NO TACK TC36 / RP62 EU / HD 70
Sales CodeGIY/R62E/28
EAN6415788296448
Product useProduct designed for providing a tamper-evident(voided effect) labeling feature on pharmaceutical cardboard boxes, supporting compliance with the Falsified Medicines Directive 2011/62/EU. After application to the substrate and subsequent removal, the label will leave a void text pattern on the substrate. Compliance is achieved by incorporating tamper-evident features as described in the new European Standard EN 16679.
Typical technical values
FaceVOID CLEAR NO TACK TC36
ProductA transparent, top-coated polyester security film with void text pattern.
Substance58g/m²DIN 53352
Caliper44µmDIN 53370
PrintabilitySuitable for flexography, screen, letterpress and offset printing methods. Thermal transfer is possible with selected wax-resin and resin ribbons.
AdhesiveRP62 EU
TypePermanent adhesive.
CompositionAcrylic, waterborne.
Tack min7NFTM 9
Regulatory infoThis adhesive is in compliance with the demands of the Code of Federal Regulations, Food and Drug Administration (FDA), 21 CFR Ch. I (April 1, 2011 edition) § 175.105.
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper118 µm
Minimum labelling temperature10 °C
Service temperature2 °C to 60 °C
Shelf lifeFrom date of manufacture: 12 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationThe tamper-evident labeling feature is influenced by the design of the cardboard box and label, the type of varnish on the box, and the particular conditions of the application; it takes several hours to days for the adhesive to develop the tamper evident functionality.
Additional infoTesting is recommended for each face-adhesive combination in each application to ensure that the labels' security features function as required. Labels should be applied to substrates for a minimum of one day for the security features to be effective.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)
Small roll1000/500
Stock1000/0

 Kennen Sie unsere Service-Optionen?

 Komponenten

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material