Produktsuche

 

 

ANTIQ WHITE WSA OD-FSC / RP30 / WHITE GLASSINE 85GCE/RP30/026415788269374

Download as pdf

Date08.05.2019 SI
ProductANTIQ WHITE WSA OD-FSC / RP30 / WHITE GLASSINE 85
Sales CodeGCE/RP30/02
EAN6415788269374
Product useProduct designed for wine and spirits applications. This natural white textured paper product has a particular narrow-ribbed pattern which gives the paper a hand crafted appearance and feel. It is robust and stable for embossing and die-cutting of complex label shapes and the adhesive provides good adhesion to polar surfaces.This product accomplish with current digital printing requirements of Print On-Demand technologies to add variable information or personalize.
Typical technical values
FaceANTIQ WHITE WSA OD-FSC
ProductA white, wood-free, narrow ribbed, machine finished, wet –strength paper that is alkali resistant and mould proof.
Substance90g/m²ISO 536
Caliper130µmISO 534
Tensile strength MD2.9kN/mISO 1924/1
Roughness850.0mL/minISO 2494/1
Opacity90%ISO 2471
Stiffness MD0.53mNmISO/DP 2493
Stiffness CD0.35mNmISO/DP 2493
PrintabilitySuitable for laser, flexography, letterpress and screen printing methods.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
AdhesiveRP30
TypePermanent adhesive
CompositionAcrylic, waterborne
Tack15N/25mmFTM 9
BackingWHITE GLASSINE 85
ProductWhite glassine woodfree backing paper.
Substance79g/m²ISO 536
Caliper69µmISO 534
Tensile strength MD8.2kN/mISO 1924
Tensile strength CD3.3kN/mISO 1924
Transparency40%DIN 53147
Performance
Total caliper220 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
PrintabilitySuitable for new generation laser or inkjet Print On Demand technologies, pre-tests recommended when inkjet printing is applied.
Product InformationThe high stiffness of the product may result in pre-dispensing, especially if there is a narrow label feed path or if the rollers inside the machine have small diameters. Reels should be wound with the label-side out. This product is not suitable for labelling of small-diameter areas such as the neck of bottles. To ensure optimal adhesion, bottles should be dry and clean during label application. This product can be used in humid conditions and ice buckets with limited performance.
Additional infoFormulation contains natural rubber latex.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)
Stock2000/0

 Kennen Sie unsere Service-Optionen?

 Komponenten

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material