Поиск продукции

 

 

FOODGLOSS / RP36 FG / HONEY GLASSINE 6509/FG36/036415780011797

Download as pdf

Date08.05.2019 SI
ProductFOODGLOSS / RP36 FG / HONEY GLASSINE 65
Sales Code09/FG36/03
EAN6415780011797
Product useProduct designed for direct food labelling applications. This product offers improved grease resistance, when compared to other paper face materials and is formulated in order to offer good adhesion to numerous substrates including cheese, poultry and meat.
Typical technical values
FaceFOODGLOSS
ProductCoated woodfree, grease repellent OBA free paper.
Substance80g/m²ISO 536
Caliper80µmISO 534
Tensile strength MD5.5kN/mISO 1924/1
Tensile strength CD2.7kN/mISO 1924/1
Brightness82%ISO 2470/1
Roughness1.2µmISO 8791PPS 10
Opacity84%ISO 2471
Gloss66%Hunter 75°
PrintabilitySuitable for flexography, letterpress, offset, screen and hot foil. Suitable for TTR printing. Inks should be carefully selected as the greaseproof treatment of the paper can affect the ink performance.
AdhesiveRP36 FG
TypePermanent adhesive.
CompositionAcrylic, water borne.
Tack min10NFTM 9
Regulatory infoThe raw materials conform to EU 10/2011 and adhesive is in compliance with the demands of the Code of Federal Regulations, Food and Drug Administration (FDA) , 21 CFR Ch. I (April1, 2011 edition) § 175.105.
BackingHONEY GLASSINE 65
ProductYellow transparent glassine backing paper.
Substance57g/m²ISO 536
Caliper51µmISO 534
Tensile strength MD6.2kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency49%DIN 53147
Performance
Total caliper148 µm
Minimum labelling temperature5 °C
Service temperature-40 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Approvals
Approvals and certificationsThis product gets an evaluation less than 1 (off-flavor just perceptible, still difficult to define) in a Sensory Analysis for Indirect Transition of Flavour according to EN 1230-2 (Robinson test). Please see the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Stock1000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме