Поиск продукции

 

 

PET MATT SILVER TC 50 / RC18 / WHITE KRAFT 130ZC/RC18/356415788220887

Download as pdf

Date08.05.2019 SI
ProductPET MATT SILVER TC 50 / RC18 / WHITE KRAFT 130
Sales CodeZC/RC18/35
EAN6415788220887
Product useProduct designed as a universal durables labelling solution, performing the lifetime of the labelled product with very good adhesion and good print resistance against chemicals, UV-light, heat and moisture. Its universality helps simplify product portfolios and reduce testing and evaluation of label materials. This product is less prone to dusting than equivalent matt films.
Typical technical values
FacePET MATT SILVER TC 50
ProductSilver, matt top-coated polyester film.
Substance71g/m²DIN 53352
Caliper51µmDIN 53370
PrintabilitySuitable for flexography, screen and offset printing methods. Special inks designed for non-absorbent materials should be used. Thermal transfer possible with selected wax-resin and resin ribbons.
AdhesiveRC18
TypeClear permanent adhesive.
CompositionRadiation-cured UV-Acrylic.
Tack20N/25mmFTM 9(on glass)
Peel 180°23N/25mmFTM 1(on glass)
BackingWHITE KRAFT 130
ProductWhite woodfree kraft backing paper.
Substance135g/m²ISO 536
Caliper134µmISO 534
Tensile strength MD7.5kN/mISO 1924
Tensile strength CD3.7kN/mISO 1924
Performance
Total caliper210 µm
Minimum labelling temperature5 °C
Service temperature-40 °C to 200 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
LimitationsThere is a risk that static electricity will impede conversion if the product is sheeted, and the Kraft liner does not guarantee layflat properties in this product construction.
Approvals
UL and CSA complianceUL recognized acc. to UL969 and CSA recognized acc. to C22.2 No. 0.15. File-No.: MH26760
ULFile MH26760: Additional conditions: D - Occasional exposure to Detergents
Application SurfaceMax Temp [°C]Min Temp [°C]Indoor UseOutdoor UseAdditional conditions
Alkyd paint (AK PT)80-40xxD
Aluminium (AL)80-40xxD
Stainless steel (SS)80-40xxD
Acrylonitrile butadiene styrene (ABS)80-40xxD
Polyethylene (PE)80-x--
Polypropylene (PP)80-x--
Polystyrene (PS)80-40xxD
Typical valuesThe listed technical data are typical values and give indications about the performance of the material only. They are not intended for specification purpose.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Coater1000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме