Поиск продукции

 

 

THERMAL TOP 200 PEFC / RH9X / HONEY GLASSINE 65ELQ/RH9X/036415788216873

Download as pdf

Date08.05.2019 SI
ProductTHERMAL TOP 200 PEFC / RH9X / HONEY GLASSINE 65
Sales CodeELQ/RH9X/03
EAN6415788216873
Product useProduct designed for general purpose topcoated direct thermal labels for retail and transport & logistics applications with good convertability, direct thermal printability and initial tack.
Typical technical values
FaceTHERMAL TOP 200 PEFC
ProductA top side barrier coated paper with a standard sensitivity thermal coating produced totally without BPA-based chemistry. This paper is made from PEFC™-certied pulp.
Substance72g/m²ISO 536
Caliper79µmISO 534
Tensile strength MD3.7kN/mISO 1924-3min
Tensile strength CD1.8kN/mISO 1924-3min
Brightness82%ISO 2470
Roughness1.9µmISO 8791-4PPS 10 / max
Imaging colourBlack
ScanningVisible red light (wavelength up to 650 nm)
DT printing speedDirect thermal printing speed up to 200 mm/s.
PrintabilitySuitable for direct thermal, UV- and water-based flexography, UV-letterpress.
SustainabilityThe product is sold as 100% PEFC™ certified under UPM Raflatac's PEFC certificate CH11/1264.00.
AdhesiveRH9X
TypeGeneral purpose permanent adhesive.
CompositionRubber, hotmelt.
Tack17N/25mmFTM 9
BackingHONEY GLASSINE 65
ProductYellow transparent glassine backing paper.
Substance57g/m²ISO 536
Caliper51µmISO 534
Tensile strength MD6.2kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency49%DIN 53147
Performance
Total caliper144 µm
Minimum labelling temperature0 °C
Service temperature-40 °C to 60 °C
Shelf lifeFrom date of manufacture: 12 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationDesigned for information labelling requiring good bar code scratch resistance to guarantee excellent scanning properties in dry end-use environments including retail, transport and logistics. Good low temperature performance once labelled and very good adhesion to non-polar surfaces. Not suitable for labelling of plasticised PVC and pre-testing required for adhesive surface printing. Recommended for dry applications only.
Approvals
Approvals and certificationsFor food packaging applications, please contact your local sales representative for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Mega2000/1000
Mega2000/2000
Mega2000/4000
Stock2000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме