Поиск продукции



RAFLABRITE-FSC / RP51 / PET 23BZY/RP5X/1E6415788130223

Download as pdf

Date07.05.2019 SI
Sales CodeBZY/RP5X/1E
Product useHigh quality mid-gloss paper for product labeling e.g. food and homecare end uses. Construction is designed for high speed converting and applications where maximized liner strength is needed. PET23 allow more labels per reel, fewer reel changes and less down time.
Typical technical values
ProductWhite wood-free machine-coated SC mid-gloss face paper.
Substance85g/m²ISO 536
Caliper71µmISO 534
Tensile strength MD5.6kN/mISO 1924/1
Tensile strength CD2.9kN/mISO 1924/1
Brightness92%ISO 2470/1
Roughness0.7µmISO 8791PPS 10
Opacity89%ISO 2471
Gloss78%Hunter 75°
CIE Whiteness130%ISO 11475
Stiffness MD0.25mNmISO/DP 2493
Stiffness CD0.15mNmISO/DP 2493
PrintabilitySuitable for flexography, offset, rotogravure, screen and hot foil. Suitable for thermal transfer printing with wax/resin ribbons. Testing recommended.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
TypeGeneral purpose permanent adhesive.
CompositionAcrylic, water borne.
Tack18N/25mmFTM 9
BackingPET 23
ProductA clear polyester backing material.
Substance32g/m²ISO 536
Caliper23µmISO 534
Tensile strength MD4.7kN/mASTM D882
Tensile strength CD4.7kN/mASTM D882
Total caliper110 µm
Minimum labelling temperature0 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
PrintabilityFlexography, letterpress, offset, rotogravure and screen. Hot foil. Guaranteed for thermal transfer use with wax/resin ribbons.
LimitationsNot recommended for labelling highly curved surfaces.
Approvals and certificationsPlease see the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)

 Наши сервисы?


 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме