Поиск продукции



PET OVERLAM FILM 12 / RC35 / PET 301R/RC35/056415788129685

Download as pdf

Date07.05.2019 SI
Sales Code1R/RC35/05
Product useProduct designed for high-end Durables over-lamination applications, requiring not only high clarity, but labelling performing the lifetime of the labelled product with very good adhesion and very good print resistance against chemicals, UV-light, heat and moisture. This product supports dark substrate lamination due to its high transparency.
Typical technical values
ProductGloss clear polyester film.
Substance17g/m²DIN 53352
Caliper12µmDIN 53370
Tensile strength MD150.0N/mm²DIN 53455
Tensile strength CD200.0N/mm²DIN 53455
Ultimate elongation MD50%DIN 53455
Ultimate elongation CD50%DIN 53455
TypeClear permanent adhesive.
CompositionRadiation-cured UV-Acrylic.
Tack10N/25mmFTM 9
BackingPET 30
ProductA clear polyester backing material.
Substance42g/m²ISO 536
Caliper30µmISO 534
Tensile strength MD6.0kN/mASTM D882
Tensile strength CD6.0kN/mASTM D882
Total caliper61 µm
Minimum labelling temperature5 °C
Service temperature-40 °C to 150 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)

 Наши сервисы?


 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме