Поиск продукции

 

 

PET EXTRA WHITE TC 50 / RC20 / HD 70BNT/RC20/286415788101254

Download as pdf

Date07.05.2019 SI
ProductPET EXTRA WHITE TC 50 / RC20 / HD 70
Sales CodeBNT/RC20/28
EAN6415788101254
Product useFor use as barcode labels, name plates, warning, instruction or identification labels wherever a durable and dependable long-term solution is required: motors, cast mechanical components, domestic and industrial machines like motor housings, white goods, computer equipment, power tools and garden machinery. Excellent heat, chemical and UV resistance assure resilient adhesion for the lifecycle of products in a variety of challenging conditions. PET Extra white TC50/RC20 offers excellent initial tack and final adhesion even on rough and non-polar surfaces like PP, PE or powder-coated and textured substrates.
Typical technical values
FacePET EXTRA WHITE TC 50
ProductWhite, glossy, top coated polyester film.
Substance75g/m²DIN 53352
Caliper50µmDIN 53370
Opacity88%ISO 2471
Gloss55%ASTM D2457
PrintabilitySuitable for flexography, screen and offset printing methods. Special inks designed for non-absorbent materials should be used.
AdhesiveRC20
TypeClear permanent adhesive.
CompositionRadiation-cured UV-Acrylic.
Tack22N/25mmFTM 9(on glass)
Peel 180°25N/25mmFTM 1(on glass)
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper134 µm
Minimum labelling temperature5 °C
Service temperature-40 °C to 150 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
PrintabilityFlexography, screen and letterpress. Special inks designed for non-absorbent materials should be used. The top-coated PET film provides excellent TTR printing results. The best durability can be reached with resin ribbons. We recommend validating the ink adhesion and durability under original conditions.
Adhesive coatweight30 g/m2 (FTM12)
AdhesionDue to the fact that the adhesive needs a certain time to reach its final adhesion, we recommend waiting at least 24h (better 72h) after dispensing the label to the substrate before proceeding with any performance tests. Test Conditions: 23ºC, 50%rH FTM1: 180º Peel Adhesion (300mm/min) with 72h dwell time
Surface[N/25mm]
Stainless Steel27
ABS25
Polycarbonate27
Polypropylene20
HDPE15
PA619
PA6 + GF3018
Polyester20
Lacquered panel19
Powder coated panel13
Chemical resistanceTest Conditions: Dwell time on glass plate: 24 h; 23°C 50% RH Immersion in chemical: 4 h; 23°C 50% RH
ChemicalVisual AppearanceEdge Penetration (mm)
Brake Fluidno change0
Engine Oilno change0
Dieselno change0
Distilled Waterno change0
Dish Washing Agentno change0
Bleachno change0
Approvals
Typical valuesThe listed technical data are typical values and give indications about the performance of the material only. They are not intended for specification purpose.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Coater1000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме