Поиск продукции

 

 

PET CLEAR TC 50 / RC18 / HD 70F8/RC18/286415788017579

Download as pdf

Date07.05.2019 SI
ProductPET CLEAR TC 50 / RC18 / HD 70
Sales CodeF8/RC18/28
EAN6415788017579
Product useProduct designed as a universal durables labelling solution for clear applications, performing for the lifetime of the labelled product with very good adhesion and good print resistance against chemicals, UV-light, heat and moisture. Its universality helps simplify product portfolios and reduce testing and evaluation of label materials.
Typical technical values
FacePET CLEAR TC 50
ProductClear, glossy, top-coated polyester film.
Substance70g/m²DIN 53352
Caliper50µmDIN 53370
PrintabilitySuitable for flexography, screen and offset printing methods. Special inks designed for non-absorbent materials should be used.
AdhesiveRC18
TypeClear permanent adhesive.
CompositionRadiation-cured UV-Acrylic.
Tack20N/25mmFTM 9(on glass)
Peel 180°23N/25mmFTM 1(on glass)
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper129 µm
Minimum labelling temperature5 °C
Service temperature-40 °C to 200 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Coater1000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме