Поиск продукции

 

 

JETLASER-FSC / RPA4 / KRAFT SPECIAL 55-FSCAYK/RPA4/EJW6415788207314

Download as pdf

Date07.05.2019 SI
ProductJETLASER-FSC / RPA4 / KRAFT SPECIAL 55-FSC
Sales CodeAYK/RPA4/EJW
EAN6415788207314
Product useSpecially designed product for office documentation, address labelling and other information labelling in SOHO, logistics and industrial applications.
Typical technical values
FaceJETLASER-FSC
ProductWoodfree machine finished paper.
Substance70g/m²ISO 536
Caliper90µmISO 534
Tensile strength MD5.2kN/mISO 1924/1
Tensile strength CD2.2kN/mISO 1924/1
Brightness98%ISO 2470/1
Roughness5.0µmISO 8791PPS 10
Opacity92%ISO 2471
CIE Whiteness164%ISO 11475
Stiffness MD0.28mNmISO/DP 2493
Stiffness CD0.10mNmISO/DP 2493
PrintabilitySuitable for laser and inkjet. Flexography, offset and screenprint. Please note that conventional printing can compromise inkjet and laser overprintability.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
AdhesiveRPA4
TypeGeneral purpose permanent adhesive for A4 and cut-size applications.
CompositionAcrylic, water borne.
Tack14N/25mmFTM 9
BackingKRAFT SPECIAL 55-FSC
ProductWhite woodfree kraft backing paper.
Substance51g/m²ISO 536
Caliper54µmISO 534
Tensile strength MD4.7kN/mISO 1924
Tensile strength CD2.0kN/mISO 1924
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-
Performance
Total caliper162 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 100°C
Shelf lifeFrom date of manufacture: 48 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationFor A4 and cut- size applications Very good heat resistance, which enables trouble-free performance in different printers. Good adhesion to corrugated board and non-polar substrates, also at low temperatures.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Mega1260/3000
Mega1260/6000
Mega2000/1500
Mega2000/3000
Mega2000/6000
Stock1260/0
Stock2000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме