Поиск продукции

 

 

PE WHITE RH 100 / RH1 / HD 70EM/RH01/286415788014073

Download as pdf

Date06.05.2019 SI
ProductPE WHITE RH 100 / RH1 / HD 70
Sales CodeEM/RH01/28
EAN6415788014073
Product useProduct designed for labelling of various forms of food packaging where conformability and resistance to moisture is required.
Typical technical values
FacePE WHITE RH 100
ProductWhite, glossy, non topcoated polyethylene film.
Substance92g/m²DIN 53352
Caliper95µmDIN 53370
Tensile strength MD19.0N/mm²DIN 53455
Tensile strength CD15.0N/mm²DIN 53455
Opacity80%ISO 2471
Gloss65%DIN 67530/160°
PrintabilitySuitable for flexography, screen and offset printing methods. Corona treatment should be applied on press for optimal ink adhesion. Printing is recommended within 4 months of delivery.
AdhesiveRH1
TypeGeneral purpose, strong permanent adhesive.
CompositionRubber, hotmelt.
Tack25N/25mmFTM 9
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper166 µm
Minimum labelling temperature-5 °C
Service temperature-40 °C to 50 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationThere is a tendency in all PE film for slight machine-direction shrinkage as the film relaxes after die-cutting.
Approvals
Approvals and certificationsPlease see the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Stock2000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме