Поиск продукции

 

 

RAFLALITE / RP36 ML / HONEY GLASSINE 65CP/ML36/036415788001622

Download as pdf

Date08.05.2019 SI
ProductRAFLALITE / RP 36 ML / HONEY GLASSINE 65
Sales CodeCP/ML36/03
EAN6415788001622
Product useProduct designed for food labelling applications. This flexible light-weight product offers good adhesion to numerous substrates such as cheese and meat.
Typical technical values
FaceRAFLALITE
ProductWhite woodfree machine coated mid-gloss paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD4.0kN/mISO 1924/1
Tensile strength CD2.0kN/mISO 1924/1
Brightness90%ISO 2470/1
Roughness1.0µmISO 8791PPS 10
Opacity81%ISO 2471
Gloss70%Hunter 75°
CIE Whiteness120%ISO 11475
Stiffness MD0.11mNmISO/DP 2493
Stiffness CD0.05mNmISO/DP 2493
PrintabilitySuitable for flexography, offset and hot foil. Paper is lightweight, so overprinting requires a fast drying ink.
AdhesiveRP36 ML
TypePermanent adhesive.
CompositionAcrylic, water borne.
Tack16N/25mmFTM 9
Regulatory infoThe raw materials conform to EU 10/2011 and adhesive is in compliance with the demands of the Code of Federal Regulations, Food and Drug Administration (FDA) , 21 CFR Ch. I (April1, 2011 edition) § 175.105.
BackingHONEY GLASSINE 65
ProductYellow transparent glassine backing paper.
Substance57g/m²ISO 536
Caliper51µmISO 534
Tensile strength MD6.2kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency49%DIN 53147
Performance
Total caliper124 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 100 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Approvals
Approvals and certificationsPlease see individual DoC for further information. Please see the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Coater1000/0
Stock1000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме