Поиск продукции

 

 

VELLUM TTR-FSC / RH9X / PROLINER PLUSGNF/RH9X/PPP6415788291528

Download as pdf

Date07.05.2019 SI
ProductVELLUM TTR-FSC / RH9X / PROLINER PLUS
Sales CodeGNF/RH9X/PPP
EAN6415788291528
Product useProduct designed for multipurpose labelling in logistics and retail applications requiring thermal transfer printability, good convertability and initial tack.
Typical technical values
FaceVELLUM TTR-FSC
ProductSurface sized woodfree supercalandered paper, which is made from FSC™ Mix Credit-certified pulp.
Substance70g/m²ISO 536
Caliper70µmISO 534
Tensile strength MD4.9kN/mISO 1924-3
Tensile strength CD2.5kN/mISO 1924-3min
Brightness106%ISO 2470
Roughness2.7µmISO 8791-4PPS 10
Opacity88%ISO 2471
CIE Whiteness150%ISO 11475
PrintabilitySuitable for flexography, offset, letterpress, thermal transfer and dot-matrix.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
AdhesiveRH9X
TypeGeneral purpose permanent adhesive.
CompositionRubber, hotmelt.
Tack17N/25mmFTM 9
BackingProLiner Plus
ProductClear polypropylene backing material.
Substance27g/m²ISO 536
Caliper30µmISO 534
Tensile strength MD200.0N/mm²DIN 53455
Tensile strength CD180.0N/mm²DIN 53455
Performance
Total caliper117 µm
Minimum labelling temperature0°C
Service temperature-40°C to 60°C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationDesigned for a wide range of industrial applications requiring bar codes or text printed with thermal transfer ribbons. Recommended for use in cold environment, particularly if the application surface is moist or if high initial adhesion is required. Very good adhesion to non-polar surfaces and pre-testing is required for adhesive surface printing.
Approvals
Approvals and certificationsFor food packaging applications, please contact your local sales representative for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Mega2000/2000
Mega2000/4000
Mega2000/6000
Stock2000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме