Поиск продукции

 

 

TH ECO BPAFREE NXT+FSC / RH9X / HONEY GLASSINE 65-FSCGGG/RH9X/FUX6415788278499

Download as pdf

Date08.05.2019 SI
ProductTHERMAL ECO BPA FREE NXT+FSC / RH9X / HONEY GLASSINE 65-FSC
Sales CodeGGG/RH9X/FUX
EAN6415788278499
Product useProduct designed for general purpose non topcoated direct thermal labels for logistics and retail applications. RAFNXT+ products combine a unique formula of sustainability credentials together with productivity benefits that will contribute to the profitability of your business.
Typical technical values
FaceTHERMAL ECO BPA FREE NXT+FSC
ProductA non top-coated paper with s standard sensitivity thermal coating produced totally without BPA-based chemistry. This face paper is made from FSC™-certified (mix credit) pulp.
Substance63g/m²ISO 536
Caliper66µmISO 534
Tensile strength MD4N/mm²ISO 1924-2
Tensile strength CD2N/mm²ISO 1924-2
Brightness86%ISO 2470min
Roughness2.0µmISO 8791-4min
Imaging colourBlack
ScanningRed light (wavelength up to 650 nm).
DT printing speedDirect thermal printing speed up to 200 mm/s.
PrintabilityDirect thermal. Water-based flexography.
SustainabilityProducts named as FSC are registered to SGSCH-COC-004879 FSC™ mix credit.
AdhesiveRH9X
TypeGeneral purpose permanent adhesive.
CompositionRubber, hotmelt.
Tack17N/25mmFTM 9
BackingHONEY GLASSINE 65-FSC
ProductYellow transparent glassine backing paper.
Substance57g/m²ISO 536
Caliper51µmISO 534
Tensile strength MD6.2kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency49%DIN 53147
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
Performance
Total caliper131 µm
Minimum labelling temperature0 °C
Service temperature-40 °C to 60 °C
Shelf lifeFrom date of manufacture: 12 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationDesigned for general purpose product for retail and logistics applications. Adhesive is designed for use in ambient and chill environment and it has very good adhesion to non-polar surfaces. Good low temperature performance once labelled. Not suitable for labelling plasticized PVC and the product has limited resistance in wet conditions. Not recommended for adhesive surface printing without testing beforehand.
Approvals
Approvals and certificationsFor food packaging applications, please contact your local sales representative for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Mega2000/2000
Mega2000/4000
Stock2000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме