Поиск продукции

 

 

PP WHITE FTC 60 / RP37 / HD 70-FSCDBG/RP37/GHC6415788280317

Download as pdf

Date06.05.2019 SI
ProductPP WHITE FTC 60 / RP37 / HD 70-FSC
Sales CodeDBG/RP37/GHC
EAN6415788280317
Product useMulti-purpose product for rigid containers, both polar and non-polar, where good water, chemical and oil resistance is needed. The product complies with EU regulations on food safety.
Typical technical values
FacePP WHITE FTC 60
ProductA white, glossy, biaxially oriented, cavitated, top-coated polypropylene film.
Substance46g/m²ISO 536
Caliper61µmISO 534
Opacity88%ISO 2471
PrintabilitySuitable for flexography, screen and offset printing methods. Thermal transfer is possible with selected wax-resin and resin ribbons.
AdhesiveRP37
TypeClear permanent adhesive.
CompositionAcrylic, water borne.
Tack10N/25mmFTM 9
Peel 90°8N/25mmFTM 2
BackingHD 70-FSC
ProductA white transparent glassine backing paper.
Substance59g/m²ISO 536
Caliper52µmISO 534
Tensile strength MD6.0kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency50%DIN 53147
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879
Performance
Total caliper131 µm ± 10%
Minimum labelling temperature5 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
LimitationsNot suitable for fanfolding.
Approvals
Approvals and certificationsBS 5609 approval (section 2 for unprinted label materials) for marine use. For food labeling applications, please consult your UPM Raflatac contact for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Mega2000/1000
Mega2000/2000
Mega2000/3000
Mega2000/4000
Stock2000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме