Поиск продукции



SILVERVAC-FSC / RP51 / PET 23FPK/RP5X/1E6415788247372

Download as pdf

Date07.05.2019 SI
ProductSILVERVAC-FSC / RP51 / PET 23
Sales CodeFPK/RP5X/1E
Product useProduct designed for eye-catching and decorative labels for packed food and personal care labelling applications. Construction is designed for high speed converting and dispensing where maximized liner strength is needed. PET23 allow more labels per reel, fewer reel changes and less down time.
Typical technical values
ProductA glossy, paper-based metallised face material. Paper used is made from FSC™-certified (mix credit) pulp.
Substance83g/m²ISO 536
Caliper66µmISO 534
Tensile strength MD4.90kN/mISO 1924/2min
Tensile strength CD3.20kN/mISO 1924/2min
PrintabilitySuitable for flexography and hot-foil printing methods. The metallised layer has been coated with an acrylic lacquer, which gives excellent printability. Special inks designed for non-absorbent materials should be used.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
TypeGeneral purpose permanent adhesive.
CompositionAcrylic, water borne.
Tack18N/25mmFTM 9
BackingPET 23
ProductA clear polyester backing material.
Substance32g/m²ISO 536
Caliper23µmISO 534
Tensile strength MD4.7kN/mASTM D882
Tensile strength CD4.7kN/mASTM D882
Total caliper104 µm
Minimum labelling temperature0 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
LimitationsUse on packaging with small diameter or test tubes might be restricted.
Product InformationDesigned for use in ambient environment in wide range of applications. Very good adhesion performance on variety substrates, including non-polar surfaces, films, and corrugated board. Good low temperature performance.
Approvals and certificationsFor food labeling applications, please consult your UPM Raflatac contact for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)

 Наши сервисы?


 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме