Поиск продукции

 

 

PP WH FTC OP BLUEGREY / RP537 / HD 70GEA/R537/286415788275986

Download as pdf

Date07.05.2019 SI
ProductPP WHITE FTC OPAQUE BLUEGREY / RP537 / HD 70
Sales CodeGEA/R537/28
EAN6415788275986
Product useProduct designed for a wide range of labeling applications where high opacity and moisture resistance are needed. The product complies with EU regulations on food safety.
Typical technical values
FacePP WHITE FTC OPAQUE BLUEGREY
ProductWhite, glossy, top-coated polypropylene film with blue/grey reverse side coating to increase the opacity.
Substance47g/m²DIN 53352
Caliper61µmDIN 53370
Tensile strength MD95MPainternal
Tensile strength CD185MPainternal
Opacity98%ISO 2471
PrintabilitySuitable for flexography, screen and offset printing methods. Thermal transfer is possible with selected wax-resin and resin ribbons.
AdhesiveRP537
TypeClear permanent adhesive.
CompositionAcrylic, water borne.
Tack min9NFTM 9
Peel 90°7N/25mmFTM 2
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper133 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Approvals
Approvals and certificationsFor food labeling applications, please consult your UPM Raflatac contact for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)
Stock1000/0

 Наши сервисы?

 Компоненты

 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме