Поиск продукции



DATA / RP51 / WHITE GLASSINE 8597/RP5X/026415780042777

Download as pdf

Date07.05.2019 SI
Sales Code97/RP5X/02
Product useProduct designed for multipurpose labelling in logistics and retail end-uses requiring variable information printability on laser/ink-jet applications and good ambient temperature performance.
Typical technical values
ProductSurface sized woodfree machine finished paper.
Substance70g/m²ISO 536
Caliper90µmISO 534
Tensile strength MD5.5kN/mISO 1924/1
Tensile strength CD2.3kN/mISO 1924/1
Brightness105%ISO 2470/1
Opacity90%ISO 2471
PrintabilitySuitable for flexography, dot-matrix, laser and ink jet.
TypeGeneral purpose permanent adhesive.
CompositionAcrylic, water borne.
Tack18N/25mmFTM 9
ProductWhite glassine woodfree backing paper.
Substance79g/m²ISO 536
Caliper69µmISO 534
Tensile strength MD8.2kN/mISO 1924
Tensile strength CD3.3kN/mISO 1924
Transparency40%DIN 53147
Total caliper175 µm
Minimum labelling temperature0 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 48 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Product InformationDesigned for a wide range of industrial applications including continuous forms products on laser and ink-jet printers. Good adhesion to all normal substrates including non-polar surfaces, films and corrugated boards. Good low temperature performance. Not recommended for labelling highly curved surfaces.
Approvals and certificationsFor food packaging applications, please contact your local sales representative for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Наличие материала

ServiceWidth (mm) / Length (m)

 Наши сервисы?


 ‭(Hidden)‬ Новости

 ‭(Hidden)‬ Брошюры

 ‭(Hidden)‬ Материалы по теме