Wyszukiwanie produktów

 

 

PP CLEAR 25 / RP74 / PET 23VB/RP74/1E6415788098967

Download as pdf

Date07.05.2019 SI
ProductPP CLEAR 25 / RP74 / PET 23
Sales CodeVB/RP74/1E
EAN6415788098967
Product useProduct designed for clear overlamination to provide resistance against abrasion and scratches, in applications where good water, chemical and oil resistance is needed.
Typical technical values
FacePP CLEAR 25
ProductA clear, glossy, biaxially oriented, corona-treated polypropylene film.
Substance23g/m²ISO 536
Caliper25µmISO 534
PrintabilitySuitable for flexography, screen, gravure and offset printing methods. Corona treatment should be applied on press for optimal ink adhesion. Printing is recommended within 4 months of delivery. Limited compatibility with UV-inks.
AdhesiveRP74
TypeUltra clear permanent adhesive
CompositionAcrylic, water borne.
Tack9N/25mmFTM 9
BackingPET 23
ProductA clear polyester backing material.
Substance32g/m²ISO 536
Caliper23µmISO 534
Tensile strength MD4.7kN/mASTM D882
Tensile strength CD4.7kN/mASTM D882
Performance
Total caliper65 µm ± 10%
Minimum labelling temperature10 °C
Service temperature-10 °C to 80 °C
Shelf lifeFrom date of manufacture: 12 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Dostępność produktu

ServiceWidth (mm) / Length (m)
Stock2000/0

 Czy znasz nasze usługi?

 Komponent

 ‭(Hidden)‬ Wiadomości

 ‭(Hidden)‬ Broszury

 ‭(Hidden)‬ Powiązane materiały