Wyszukiwanie produktów

 

 

PE CLEAR TC 100 / RP31 PURUS / HD 7055/R31P/286415788098417

Download as pdf

Date08.05.2019 SI
ProductPE CLEAR TC 100 / RP31 PURUS / HD 70
Sales Code55/R31P/28
EAN6415788098417
Product useProduct designed for labelling pharmaceutical packaging applications when low leachable characteristics are required. This product performs well on small diameters and curved surfaces, and on a variety of labelling substrates including Polypropylene (PP) and low-density polyethylene (LDPE).
Typical technical values
FacePE CLEAR TC 100
ProductA transparent, glossy, top-coated polyethylene film.
Substance90g/m²ISO 536
Caliper96µmISO 534
PrintabilitySuitable for flexography, screen and offset printing methods. Thermal transfer is possible with selected wax-resin and resin ribbons.
AdhesiveRP31 PURUS
TypePermanent adhesive.
CompositionAcrylic, waterborne.
Tack min12NFTM 9
Regulatory infoThis adhesive is in compliance with the demands of the Code of Federal Regulations, Food and Drug Administration (FDA), 21 CFR Ch. I (April 1, 2011 edition) 175.105. The FDA has assigned Drug Master file (DMF) number 25392, type III for RP31 Purus.
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper171 µm
Minimum labelling temperature10 °C
Service temperature-40 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationStiffness of the face material, die-cutting direction, storage conditions and the container diameter can influence to edge-lifting. Note also that heavy ink coverage and overlamination increase the stiffness of the face material. There is a tendency in all PE film for slight machine-direction shrinkage as the film relaxes after die-cutting.
Additional infoNeither natural rubber latex nor ruminant animal-derived materials are used in the manufacture of RP31 Purus.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Dostępność produktu

ServiceWidth (mm) / Length (m)
Stock1000/0

 Czy znasz nasze usługi?

 Komponent

 ‭(Hidden)‬ Wiadomości

 ‭(Hidden)‬ Broszury

 ‭(Hidden)‬ Powiązane materiały