Wyszukiwanie produktów

 

 

PP CLEAR 60 / RC12 / HD 707H/RC12/286415788031513

Download as pdf

Date17.09.2019 SI
ProductPP CLEAR 60 / RC12 / HD 70
Sales Code7H/RC12/28
EAN6415788031513
Product useProduct designed for open closure labeling applications. This highly transparent re-sealable label material is especially suitable for industrial wet wipe applications.
Typical technical values
FacePP CLEAR 60
ProductA transparent, glossy, biaxially oriented, corona-treated polypropylene film.
Substance53g/m²DIN 53352
Caliper58µmDIN 53370
Tensile strength MD200.0N/mm²DIN 53455
Tensile strength CD170.0N/mm²DIN 53455
Gloss80%DIN 67530/245°
PrintabilitySuitable for flexography, screen, gravure and offset printing methods. Corona treatment should be applied on press for optimal ink adhesion. Printing is recommended within 4 months of delivery. Limited compatibility with UV-inks.
AdhesiveRC12
TypeUV acrylic adhesive.
CompositionRadiation-cured UV-Acrylic.
Peel min4.0N/25mmFTM 290°
Peel max7.0N/25mmFTM 290°
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper132 µm
Minimum labelling temperature10 °C
Service temperature0 °C to 120 °C
Shelf lifeFrom date of manufacture: 6 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationA trial is always recommended to verify the product/end use suitability. Note: due to nature of non Top Coated PP face film; no claims due to printability performance accepted.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Dostępność produktu

ServiceWidth (mm) / Length (m)
Stock1000/0

 Czy znasz nasze usługi?

 Komponent

 ‭(Hidden)‬ Wiadomości

 ‭(Hidden)‬ Broszury

 ‭(Hidden)‬ Powiązane materiały