Wyszukiwanie produktów



POLYPRINT 100 / RPMD / HD 703K/RPMD/286415788259795

Download as pdf

Date08.05.2019 SI
ProductPOLYPRINT 100 / RPMD / HD 70
Sales Code3K/RPMD/28
Product useProduct designed for labelling healthcare applications when low leachable characteristics are required. This matt product performs well on blood donation labels and offers a tight mandrel hold on blood collection tubes.
Typical technical values
ProductMatt coated, white, polyethylene film.
Substance80g/m²DIN 53352
Caliper105µmDIN 53370
Tensile strength MD45.0N/mm²DIN 53455
Tensile strength CD35.0N/mm²DIN 53455
Opacity93%DIN 53146/1
Ultimate elongation MD157%DIN 53455
Ultimate elongation CD105%DIN 53455
PrintabilitySuitable for flexography, letterpress, screen and offset. Special inks designed for non-absorbent materials should be used. Thermal transfer is possible with selected ribbons.
TypePermanent adhesive
CompositionAcrylic, waterborne
Tack18N/25mmFTM 9
Regulatory infoRPMD adhesive is in compliance with the demands of the Code of Federal Regulations, Food and Drugs (FDA), 21 CFR Ch. I (April 1, 2016 edition) § 175.105. RPMD meets the requirements of ISO 10993-5 and is considered to have no cytotoxic potential (tested with Pharmagloss face material). Raw materials of RPMD are compliant with EU 1774/2002/EC.
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Total caliper180 µm
Minimum labelling temperature-10 °C
Service temperature-60 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Product InformationStiffness of the face material, die-cutting direction, storage conditions and the container diameter can influence to edge-lifting. Note also that heavy ink coverage and overlamination increase the stiffness of the face material.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Dostępność produktu

ServiceWidth (mm) / Length (m)

 Czy znasz nasze usługi?


 ‭(Hidden)‬ Wiadomości

 ‭(Hidden)‬ Broszury

 ‭(Hidden)‬ Powiązane materiały