Produktsuche

 

 

PP INKJET S W ON-DEMAND / RPAF / WHITE GLASSINE 65EBJ/RPAF/016415788195437

Download as pdf

Date07.05.2019 SI
ProductPP INKJET SILK WHITE ON-DEMAND / RPAF / WHITE GLASSINE 65
Sales CodeEBJ/RPAF/01
EAN6415788195437
Product useSpecially designed ink-jet printable material for product labelling, promotional labelling and industrial applications including variable information and requiring photographic colour printing with high resolution image.
Typical technical values
FacePP INKJET SILK WHITE ON-DEMAND
ProductSatin finish coated white polypropylene.
Substance72g/m²ISO 536
Caliper89µmISO 534
PrintabilitySuitable for inkjet printing, dye-and/or pigmented based inks: for new pigmented inks generation pre-testing is recommended. Inkjet coating has been specially designed for the purpose and the characteristics of these coatings might compromise the print result when using conventional methods such as flexography and offset.
Tear strength MD174mNISO 527-1
Tear strength CD92mNISO 527-1
AdhesiveRPAF
TypeGeneral purpose permanent adhesive for A4 and cut-size applications.
CompositionAcrylic, water borne.
Tack min9NFTM 9
BackingWHITE GLASSINE 65
ProductWhite glassine, transparent backing paper.
Substance59g/m²ISO 536
Caliper52µmISO 534
Tensile strength MD6.0kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper164 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 100 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationFor On-Demand Ink-Jet printed reelstock applications with excellent ink drying time, water resistance and scratch resistance in moist conditions. Suitable for photocell dispensing systems. RPAF adhesive has excellent UV-stability and good water resistance once labelled. Good adhesion properties and heat resistance. Limited adhesion at low temperatures. The highest end-use temperature must be separately checked together with the face material.
Approvals
Regulatory infoFace material contains the substance Boric Acid, CAS 10043-35-3 which is included on the candidate list of substances of very high concern (SVHC) for authorization, according to article 59 (1,10) of the REACH registration regulation (EC) No 1907/2006 in a concentration above 0.1% (w/w).
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)
Fastmover220/750
Stock1320/0

 Kennen Sie unsere Service-Optionen?

 Komponenten

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material