Produktsuche

 

 

VELMART WHITE WSA-FSC / RP30W / WHITE GLASSINE 85EFP/R30W/026415788201398

Download as pdf

Date06.05.2019 SI
ProductVELMART WHITE WSA-FSC / RP30W / WHITE GLASSINE 85
Sales CodeEFP/R30W/02
EAN6415788201398
Product useProduct designed for wine and spirits labelling applications, when wash-off performance is needed. This embossed, white, textured paper product is robust and stable for embossing and die-cutting of complex label shapes. The adhesive provides good adhesion to polar surfaces and can be washed off in hot alkaline water.
Typical technical values
FaceVELMART WHITE WSA-FSC
ProductA wood-free, machine-finished, embossed, wet-strength paper that is alkali resistant and mould proof.
Substance90g/m²ISO 536
Caliper118µmISO 534
Tensile strength MD4.4kN/mISO 1924/1
Tensile strength CD2.5kN/mISO 1924/1
Brightness99%ISO 2470/1
Opacity88%ISO 2471
Stiffness MD0.43mNmISO/DP 2493
Stiffness CD0.25mNmISO/DP 2493
PrintabilitySuitable for letterpress, flexography, offset, screen and hot-foil printing methods.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
AdhesiveRP30W
TypeWash-off adhesive.
CompositionAcrylic, water borne.
Tack15N/25mmFTM 9
BackingWHITE GLASSINE 85
ProductWhite glassine woodfree backing paper.
Substance79g/m²ISO 536
Caliper69µmISO 534
Tensile strength MD8.2kN/mISO 1924
Tensile strength CD3.3kN/mISO 1924
Transparency40%DIN 53147
Performance
Total caliper207 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationThe wash-off time is strongly dependent on the face paper's water absorption properties. Full cover printing, varnishing and foiling can affect wash-off performance. There is a risk that the wash-off properties may be reduced if labels are stored at elevated temperatures or in humid conditions or under UV exposure (such as outdoor conditions) for long periods of time. The high stiffness of the product may result in pre-dispensing, especially if there is a narrow label feed path or if the rollers inside the machine have small diameters. Reels should be wound with the label-side out. This product is not suitable for labelling of small-diameter areas such as the neck of bottles. To ensure optimal adhesion, bottles should be dry and clean during label application. The typical wash off requirements for RP30W are hot water (70-80°C) with an alkaline additive (1.5 – 2.5 w-% NaOH).
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)
Coater1000/0

 Kennen Sie unsere Service-Optionen?

 Komponenten

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material