PURE COTTON / RP30 / WHITE GLASSINE 85BCI/RP30/026415788160565

Download as pdf

Date07.05.2019 SI
Sales CodeBCI/RP30/02
Product useProduct designed for premium wine and spirits application with 100% cotton face paper. When combined with RP30, a permanent acrylic adhesive, the label provides good adhesion to polar surfaces. This non-washable product with white glassine backing offers good robustness and stability for embossing and die-cutting of complex label shapes.
Typical technical values
Product100% pure cotton paper.
Substance100g/m²ISO 536
Caliper165µmISO 534
Tensile strength MD45.0kN/mISO 1924
Roughness1100mL/minISO 2494Bendtsen
Opacity89%ISO 2471
PrintabilitySuitable for silkscreen printing, as well as excellent offset, and letterpress printability.
TypePermanent adhesive
CompositionAcrylic, waterborne
Tack15N/25mmFTM 9
ProductWhite glassine woodfree backing paper.
Substance79g/m²ISO 536
Caliper69µmISO 534
Tensile strength MD8.2kN/mISO 1924
Tensile strength CD3.3kN/mISO 1924
Transparency40%DIN 53147
Total caliper255 µm
Minimum labelling temperature5 °C
Service temperature-20°C to 80 °C
Shelf lifeFrom date of manufacture: 12 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Product InformationThe high stiffness of the product may result in premature dispensing, especially if the label feed is constricted or if the bars inside the machine have small diameters. Reels should be wound with the face-side out. This product is not suitable for labelling of small-diameter areas such as the necks of bottles. To ensure optimal adhesion the bottles should be dry and clean during label application.
Additional infoFormulation contains natural rubber latex.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)

 Kennen Sie unsere Service-Optionen?


 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material