Produktsuche

 

 

RAFLAMATT 90 WSA-FSC / RP30 / PET 23BYL/RP30/1E6415788117781

Download as pdf

Date06.05.2019 SI
ProductRAFLAMATT 90 WSA-FSC / RP30 / PET 23
Sales CodeBYL/RP30/1E
EAN6415788117781
Product useProduct designed for wine and spirits applications. This matt coated smooth paper product provides good adhesion to polar surfaces. The PET liner enables higher productivity during label conversion and dispensing.
Typical technical values
FaceRAFLAMATT WSA 90-FSC
ProductA matt, off-machine coated, wood-free paper that is wet strength and alkali resistant.
Substance90g/m²ISO 536
Caliper93µmISO 534
Brightness92%ISO 2470/1
Roughness1.6µmISO 8791
Opacity89%ISO 2471
Gloss20%Hunter 75°
PrintabilitySuitable for letterpress, flexography, rotogravure, screen, offset and hot-foil printing methods. Thermal transfer is possible with select ribbons.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
AdhesiveRP30
TypePermanent adhesive
CompositionAcrylic, waterborne
Tack15N/25mmFTM 9
BackingPET 23
ProductA clear polyester backing material.
Substance32g/m²ISO 536
Caliper23µmISO 534
Tensile strength MD4.7kN/mASTM D882
Tensile strength CD4.7kN/mASTM D882
Performance
Total caliper133 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationThe high stiffness of the product may result in pre-dispensing, especially if there is a narrow label feed path or if the rollers inside the machine have small diameters. Reels should be wound with the label-side out. This product is not suitable for labelling of small-diameter areas such as the neck of bottles. To ensure optimal adhesion, bottles should be dry and clean during label application. This product can be used in humid conditions and ice buckets with limited performance.
Additional infoFormulation contains natural rubber latex.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)
Coater1000/0
Mega2000/2000
Stock2000/0

 Kennen Sie unsere Service-Optionen?

 Komponenten

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material