Produktsuche

 

 

PP WHITE UV INKJET 60 / RP37 / HD 70CVW/RP37/286415788123874

Download as pdf

Date07.05.2019 SI
ProductPP WHITE UV INKJET 60 / RP37 / HD 70
Sales CodeCVW/RP37/28
EAN6415788123874
Product useMulti-purpose, UV Inkjet optimized product for rigid containers, both polar and non-polar, where good water, chemical and oil resistance is needed.
Typical technical values
FacePP WHITE UV INKJET 60
ProductA white, glossy, biaxially oriented, cavitated, top-coated polypropylene film.
Substance45g/m²ISO 536
Caliper60µmISO 534
Opacity88%ISO 2471
PrintabilitySuitable for UV Inkjet digital printing. As the presses and requirements can vary significantly, testing is always required prior to wider application. Also suitable for flexography, screen, letterpress and offset. Thermal transfer is possible with selected wax-resin and resin ribbons.
AdhesiveRP37
TypeClear permanent adhesive.
CompositionAcrylic, water borne.
Tack10N/25mmFTM 9
Peel 90°8N/25mmFTM 2
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper132 µm ± 10%
Minimum labelling temperature5 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Approvals
Approvals and certificationsFor food labeling applications, please consult your UPM Raflatac contact for the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)
Stock2000/0

 Kennen Sie unsere Service-Optionen?

 Komponenten

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material