Produktsuche

 

 

MPRINT WHITE WSA-FSC / RP30 / PET 30BWI/RP30/056415788109038

Download as pdf

Date08.05.2019 SI
ProductMULTIPRINT WHITE WSA-FSC / RP30 / PET 30
Sales CodeBWI/RP30/05
EAN6415788109038
Product useProduct designed for wine and spirits applications. This high quality white paper product provides good adhesion to polar surfaces. The more robust PET liner enables higher productivity during label conversion and dispensing.
Typical technical values
FaceMULTIPRINT WHITE WSA-FSC
ProductA surface-sized, wood-free SC-paper that is wet strength, alkali resistant and mould proof.
Substance90g/m²ISO 536
Caliper112µmISO 534
Brightness88%ISO 2470/1
Opacity91%ISO 2471
PrintabilitySuitable for UV-flexo, offset, letterpress, screen and hot-foil printing methods.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
AdhesiveRP30
TypePermanent adhesive
CompositionAcrylic, waterborne
Tack15N/25mmFTM 9
BackingPET 30
ProductA clear polyester backing material.
Substance42g/m²ISO 536
Caliper30µmISO 534
Tensile strength MD6.0kN/mASTM D882
Tensile strength CD6.0kN/mASTM D882
Performance
Total caliper163 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationThe high stiffness of the product may result in pre-dispensing, especially if there is a narrow label feed path or if the rollers inside the machine have small diameters. Reels should be wound with the label-side out. This product is not suitable for labelling of small-diameter areas such as the neck of bottles. To ensure optimal adhesion, bottles should be dry and clean during label application. This product can be used in humid conditions and ice buckets with limited performance.
Additional infoFormulation contains natural rubber latex.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)
Mega2000/2000
Stock2000/0

 Kennen Sie unsere Service-Optionen?

 Komponenten

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material