Produktsuche

 

 

PP CLEAR TC 50 P / RC7B / PET 309D/RC7B/056415788093856

Download as pdf

Date08.05.2019 SI
ProductPP CLEAR TC 50 P / RC7B / PET 30
Sales Code9D/RC7B/05
EAN6415788093856
Product useProduct designed for demanding beverage labelling applications where an ultra-clear no-label look and water resistance is required. Offers excellent UV-stability and resistance to water-whitening, and is suitable for pasteurization and when applied on wet bottles.
Typical technical values
FacePP CLEAR TC 50 P
ProductA clear, glossy, biaxially oriented, top-coated polypropylene film.
Substance47g/m²ISO 536
Caliper51µmISO 534
PrintabilitySuitable for flexography, screen and offset printing methods. Thermal transfer is possible with selected wax-resin and resin ribbons.
AdhesiveRC7B
TypeClear permanent adhesive.
CompositionRadiation-cured UV-Acrylic.
Tack15N/25mmFTM 9
BackingPET 30
ProductA clear polyester backing material.
Substance42g/m²ISO 536
Caliper30µmISO 534
Tensile strength MD6.0kN/mASTM D882
Tensile strength CD6.0kN/mASTM D882
Performance
Total caliper104 µm
Minimum labelling temperature10 °C
Service temperature-20 °C to 140 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Approvals
Approvals and certificationsPlease see the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)
Coater1000/0

 Kennen Sie unsere Service-Optionen?

 Komponenten

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material