ICY WHITE PM OD-FSC / RP30 / WHITE GLASSINE 85GCH/RP30/026415788269404

Download as pdf

Date08.05.2019 SI
Sales CodeGCH/RP30/02
Product useProduct designed for premium wine and spirits applications exposed to ice bucket and cold chain logistics. Product is robust and stable for embossing and die-cutting of complex label shapes. It provides good adhesion to polar surfaces and shows excellent water-resistance during immersion in an ice bucket. This high white uncoated premium product shows no edge-lifting, wrinkles, bubbles or creases and remains opaque and does not discolour even after hours in the slurry of an ice bucket.This product accomplish with current digital printing requirements of Print On-Demand technologies to add variable information or personalize.
Typical technical values
ProductA high white, uncoated, treated, wood-free paper with wet strength and mould proof treatments.
Substance110g/m²ISO 536
Caliper138µmISO 534
Dry Opacity96%ISO 2471
Wet Opacity90%ISO 2471
PrintabilitySuitable for laser, UV-flexo, offset and hot-foil printing methods. Testing is recommended when other printing techniques are used.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
TypePermanent adhesive
CompositionAcrylic, waterborne
Tack15N/25mmFTM 9
ProductWhite glassine woodfree backing paper.
Substance79g/m²ISO 536
Caliper69µmISO 534
Tensile strength MD8.2kN/mISO 1924
Tensile strength CD3.3kN/mISO 1924
Transparency40%DIN 53147
Total caliper228 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
PrintabilitySuitable for new generation laser or inkjet Print On Demand technologies, pre-tests recommended when inkjet printing is applied.
Product InformationThe high stiffness of the product may result in pre-dispensing, especially if there is a narrow label feed path or if the rollers inside the machine have small diameters. Reels should be wound with the label-side out. This product is not suitable for labelling small-diameter areas such as the neck of bottles. To ensure optimal adhesion, bottles should be dry and clean during label application.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)

 Kennen Sie unsere Service-Optionen?


 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material