Produktsuche

 

 

POLYLASER M W ON-DEMAND / RPAF / WHITE GLASSINE 85FID/RPAF/026415788261453

Download as pdf

Date06.05.2019 SI
ProductPOLYLASER M W ON-DEMAND / RPAF / WHITE GLASSINE 85
Sales CodeFID/RPAF/02
EAN6415788261453
Product useProduct designed for laser printed logistics and industrial variable information label applications, Chemical and Pharma. This last one under specific analysis of requirements. BS5609 S2 approved for overseas transport. It can be also used in address labelling or other information labelling. This filmic product has excellent tolerance for temperature and humidity fluctuations.
Typical technical values
FacePOLYLASER MATT WHITE ON-DEMAND
ProductWhite, matt coated heat stabilized polyester film.
Substance75g/m²DIN 53352
Caliper58µmDIN 53370
Elongation MD150.0%DIN 53455
Elongation CD130.0%DIN 53455
Opacity88%DIN 53146/1
PrintabilitySuitable for laser and common label printing methods like flexography, screen and offset due to the pre-treatment. Special inks designed for non-absorbent materials should be used.
AdhesiveRPAF
TypeGeneral purpose permanent adhesive for A4 and cut-size applications.
CompositionAcrylic, water borne.
Tack min9NFTM 9
BackingWHITE GLASSINE 85
ProductWhite glassine woodfree backing paper.
Substance79g/m²ISO 536
Caliper69µmISO 534
Tensile strength MD8.2kN/mISO 1924
Tensile strength CD3.3kN/mISO 1924
Transparency40%DIN 53147
Performance
Total caliper164 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 100 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)
Fastmover220/750
Stock1320/0

 Kennen Sie unsere Service-Optionen?

 Komponenten

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material