Produktsuche

 

 

ICY WHITE ICE PM-FSC / RP30 / PET 30EZS/RP30/056415788234884

Download as pdf

Date07.05.2019 SI
ProductICY WHITE ICE PREMIUM-FSC / RP30 / PET 30
Sales CodeEZS/RP30/05
EAN6415788234884
Product useProduct designed for premium wine and spirits applications exposed to ice bucket and cold chain logistics. Product provides good adhesion to polar surfaces and shows excellent water-resistance during immersion in an ice bucket. This high white uncoated premium product shows no edge-lifting, wrinkles, bubbles or creases and remains opaque and does not discolour even after hours in the slurry of an ice bucket. The more robust PET liner enables higher productivity during label conversion and dispensing.
Typical technical values
FaceICY WHITE ICE PREMIUM-FSC
ProductA high white, uncoated, treated, wood-free paper with wet strength and mould proof treatments.
Substance110g/m²ISO 536
Caliper138µmISO 534
Dry Opacity96%ISO 2471
Wet Opacity90%ISO 2471
PrintabilitySuitable for UV-flexo, offset and hot-foil printing methods. Testing is recommended when other printing techniques are used.
SustainabilityThe product is sold as FSC™ Mix Credit under UPM Raflatac's FSC certificate SGSCH-COC-004879.
AdhesiveRP30
TypePermanent adhesive
CompositionAcrylic, waterborne
Tack15N/25mmFTM 9
BackingPET 30
ProductA clear polyester backing material.
Substance42g/m²ISO 536
Caliper30µmISO 534
Tensile strength MD6.0kN/mASTM D882
Tensile strength CD6.0kN/mASTM D882
Performance
Total caliper189 µm
Minimum labelling temperature5 °C
Service temperature-20 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationThe high stiffness of the product may result in pre-dispensing, especially if there is a narrow label feed path or if the rollers inside the machine have small diameters. Reels should be wound with the label-side out. This product is not suitable for labelling small-diameter areas such as the neck of bottles. To ensure optimal adhesion, bottles should be dry and clean during label application.
Additional infoFormulation contains natural rubber latex.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Verfügbarkeit der Produkte

ServiceWidth (mm) / Length (m)
Stock1000/0
Stock1000/500

 Kennen Sie unsere Service-Optionen?

 Komponenten

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Broschüren

 ‭(Hidden)‬ Weiterführendes Material