Product search

 

 

POLYPRINT 100 / RH1 / HONEY GLASSINE 653K/RH01/036415780013302

Download as pdf

Date23.08.2019 SI
ProductPOLYPRINT 100 / RH1 / HONEY GLASSINE 65
Sales Code3K/RH01/03
EAN6415780013302
Product useProduct designed for labeling containers with plastic surface in industrial chemical applications in cold environment where high initial adhesion is required. This product provides good overprinting properties for thermal transfer. High opacity enables over-labeling and provides high contrast even on dark colored containers. The stiffness of the face material makes it ideal for large labels.
Typical technical values
FacePOLYPRINT 100
ProductMatt coated, white, polyethylene film.
Substance80g/m²DIN 53352
Caliper105µmDIN 53370
Opacity93%DIN 53146/1
PrintabilitySuitable for flexography, letterpress, screen and offset. Special inks designed for non-absorbent materials should be used. Thermal transfer is possible with selected ribbons.
AdhesiveRH1
TypeGeneral purpose, strong permanent adhesive.
CompositionRubber, hotmelt.
Tack25N/25mmFTM 9
BackingHONEY GLASSINE 65
ProductYellow transparent glassine backing paper.
Substance57g/m²ISO 536
Caliper51µmISO 534
Tensile strength MD6.2kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency49%DIN 53147
Performance
Total caliper175 µm
Minimum labelling temperature-5 °C
Service temperature-40 °C to 50 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Approvals
Approvals and certificationsBS 5609 approval (section 2 for unprinted label materials) for marine use. For food applications please see the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Stock1000/0

 Do you know our services?

 Components

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials