Product search

 

 

RAFLACOAT OPTI PEFC / RH9X / HONEY GLASSINE 65CPM/RH9X/036415788166390

Download as pdf

Date08.05.2019 SI
ProductRAFLACOAT OPTI PEFC / RH9X / HONEY GLASSINE 65
Sales CodeCPM/RH9X/03
EAN6415788166390
Product useProduct designed for wide range of food and home care product labelling applications. For applications requiring mid-gloss appearance and high quality multicolor printing quality.
Typical technical values
FaceRAFLACOAT OPTI PEFC
ProductWhite woodfree machine coated mid-gloss paper.
Substance80g/m²ISO 536
Caliper70µmISO 534
Tensile strength MD5.8kN/mISO 1924/1
Tensile strength CD2.8kN/mISO 1924/1
Brightness90%ISO 2470/1
Roughness1.0µmISO 8791PPS 10
Opacity89%ISO 2471
Gloss64%Hunter 75°
CIE Whiteness120%ISO 11475
Stiffness MD0.23mNmISO/DP 2493
Stiffness CD0.13mNmISO/DP 2493
PrintabilitySuitable for flexography, offset, rotogravure, screen and hot foil. Suitable for thermal transfer printing with wax/resin ribbons. Testing recommended. Non-optimized paper suitable for HP Indigo digital offset printing in some applications, print test recommended.
SustainabilityThe product is sold as 100% PEFC™ certified under UPM Raflatac's PEFC certificate CH11/1264.00.
AdhesiveRH9X
TypeGeneral purpose permanent adhesive.
CompositionRubber, hotmelt.
Tack17N/25mmFTM 9
BackingHONEY GLASSINE 65
ProductYellow transparent glassine backing paper.
Substance57g/m²ISO 536
Caliper51µmISO 534
Tensile strength MD6.2kN/mISO 1924
Tensile strength CD2.3kN/mISO 1924
Transparency49%DIN 53147
Performance
Total caliper135 µm
Minimum labelling temperature0 °C
Service temperature-40 °C to 60 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
LimitationsUse on packaging with small diameter or test tubes might be restricted.
Product InformationDesigned for use in ambient and chill environment, particularly good performance in chill environment if the application surface is moist or very high initial adhesion is required. Good low temperature performance once labelled. Very good adhesion to non-polar surfaces.
Approvals
Approvals and certificationsPlease see the individual Declaration of Conformance (DoC) document of each product component for further compliance information.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Stock2000/0

 Do you know our services?

 Components

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials