Product search



RAFLEX PLUS WHITE TC / RP CRYO / HD 709S/RPCR/286415788196878

Download as pdf

Date08.05.2019 SI
Sales Code9S/RPCR/28
Product useProduct designed for identification labelling of cryogenic laboratory sample containers, on polypropylene (PP) cryogenic vials, tubes and storage boxes (PP and cardboard), stored in the range of -150 °C to -196 °C achieved with liquid nitrogen. Information is secured to identify biological samples for the full duration of their cryogenically extended lifetimes. This product also withstands multiple thawing and freezing cycles – up to 10 times as samples are thawed at room temperature or in warm or iced water, and later returned to the freezer.
Typical technical values
ProductA white, conformable, top-coated, biaxially oriented film based on a co-extruded polymer blend.
Substance55g/m²ISO 536
Caliper56µmISO 534
Opacity85%ISO 2471
PrintabilitySuitable for flexography, screen and offset printing methods. Thermal transfer is possible with selected wax-resin and resin ribbons.
AdhesiveRP CRYO
TypePermanent adhesive.
CompositionAcrylic, waterborne.
Tack min7NFTM 9
Regulatory infoThe raw materials conform to EU 10/2011 and this adhesive is in compliance with the demands of the Code of Federal Regulations, Food and Drugs (FDA), 21 CFR Ch. I (April 1, 2013 edition) § 175.105.
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Total caliper132 µm
Minimum labelling temperature-10 °C
Service temperature-196 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Small roll1000/500

 Do you know our services?


 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials