Product search



ACRYLATE CL DESTRUCT 50 / RC18 / PET 30 / LOW CW UNCL SPCDWN/RC18/05/U16415788186176

Download as pdf

Date07.05.2019 SI
Sales CodeDWN/RC18/05/U1
Product useProduct designed for sealing and tamper-evident applications. This UV resistant product is suitable for various kinds of security seals and vignettes due to the low internal tear strength of the material. With its good clarity - this product also provides minimal interference to packaging information, design and branding.
Typical technical values
ProductClear, gloss Acrylate film with reduced elongation at break.
Substance61g/m²ISO 536
Caliper50µmISO 534
Transparency92%DIN 5036
PrintabilitySuitable for flexography, offset and gravure printing. Typical surface energy 38 Dynes/cm.
Tensile strength1000MPaISO 527
TypeClear permanent adhesive.
CompositionRadiation-cured UV-Acrylic.
Tack20N/25mmFTM 9(on glass)
Peel 180°23N/25mmFTM 1(on glass)
BackingPET 30
ProductA clear polyester backing material.
Substance42g/m²ISO 536
Caliper30µmISO 534
Tensile strength MD6.0kN/mASTM D882
Tensile strength CD6.0kN/mASTM D882
Total caliper108 µm
Minimum labelling temperature5 °C
Service temperature0 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Product InformationIt takes from several hours to days for the adhesive to develop its full tamper evident functionality.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Small roll1000/500

 Do you know our services?


 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials