Product search

 

 

RAFLEX PLUS WHITE TC / RP80 LT / HD 709S/R8LT/286415788177839

Download as pdf

Date08.05.2019 SI
ProductRAFLEX PLUS WHITE TC / RP80 LT / HD 70
Sales Code9S/R8LT/28
EAN6415788177839
Product usePharmaceutical product recommended for identification labelling on laboratory vials, ampoules, test tubes, plates and slides stored at conditions down to -80 °C.
Typical technical values
FaceRAFLEX PLUS WHITE TC
ProductA white, conformable, top-coated, biaxially oriented film based on a co-extruded polymer blend.
Substance55g/m²ISO 536
Caliper56µmISO 534
Opacity85%ISO 2471
PrintabilitySuitable for flexography, screen and offset printing methods. Thermal transfer is possible with selected wax-resin and resin ribbons.
AdhesiveRP80 LT
TypePermanent adhesive
CompositionAcrylic, waterborne
Tack min8NFTM 9
Regulatory infoThe raw materials conform to EU 10/2011 and this adhesive is in compliance with the demands of the Code of Federal Regulations, Food and Drug Administration (FDA), 21 CFR Ch. I (April 1, 2013 edition) § 175.105.
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper131 µm
Minimum labelling temperature-10 °C
Service temperature-80 °C to 80 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Product InformationRP80 LT retains its adhesion over long periods of time and in low-temperature conditions, on surfaces including glass, cardboard and PP. This adhesive withstands multiple freeze-thaw cycles (reconstitution can be done for example in ice water or a warm water bath; samples can later be returned to the freezer). Edge-lifting resistance is influenced by the stiffness of the label’s face material, the surface type being labelled, the diameter of the labelled container, and the particular conditions of the application.
Approvals
Approvals and certificationsRP80 LT is approved from the patient safety point of view (migration tested) for labelling of blood bags.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Small roll1000/500
Stock1000/0

 Do you know our services?

 Components

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials