Product search

 

 

PET MATT WHITE TC 50 / RC18 / HD 70CFK/RC18/286415788113714

Download as pdf

Date07.05.2019 SI
ProductPET MATT WHITE TC 50 / RC18 / HD 70
Sales CodeCFK/RC18/28
EAN6415788113714
Product useProduct designed as a universal durables labelling solution, performing the lifetime of the labelled product with very good adhesion and very good print resistance against chemicals, UV-light, heat and moisture. Its universality helps simplify product portfolios and reduce testing and evaluation of label material.
Typical technical values
FacePET MATT WHITE TC 50
ProductWhite, matt top-coated polyester film.
Substance73g/m²DIN 53352
Caliper55µmDIN 53370
Opacity78%ISO 2471min.
PrintabilitySuitable for flexography, screen and offset printing methods. Special inks designed for non-absorbent materials should be used.
AdhesiveRC18
TypeClear permanent adhesive.
CompositionRadiation-cured UV-Acrylic.
Tack20N/25mmFTM 9(on glass)
Peel 180°23N/25mmFTM 1(on glass)
BackingHD 70
ProductA white transparent glassine backing paper.
Substance60g/m²ISO 536
Caliper53µmISO 534
Tensile strength MD6.6kN/mISO 1924
Tensile strength CD2.5kN/mISO 1924
Transparency50%DIN 53147
Performance
Total caliper134 µm
Minimum labelling temperature5 °C
Service temperature-40 °C to 200 °C
Shelf lifeFrom date of manufacture: 24 months, under FINAT defined storage conditions (+20-25°C and RH 40-50%). Prolonged storage at higher temperatures and/or humidity levels will shorten the shelf life.
Information
Adhesive coatweight25 g/m²
AdhesionDue to the fact that the adhesive needs a certain time to reach its final adhesion, we recommend waiting at least 24h (better 72h) after dispensing the label to the substrate before proceeding with any performance tests. Test Conditions: 23°C, 50%RH FTM1: 180° Peel Adhesion (300 mm/min) with 72 h dwell time.
Surface[N/25mm]
Stainless Steel21
ABS18
Polycarbonate25
Polypropylene18
HDPE12
PA616
PA6 + GF3015
Polyester17
Lacquered panel15
Powder coated panel11
Chemical resistanceTest Conditions: Dwell time on glass plate: 24 h; 23°C 50% RH Immersion in chemical: 4 h; 23°C 50% RH
ChemicalVisual AppearanceEdge Penetration (mm)
Brake Fluidno change0
Engine Oilno change0
Dieselno change0
Distilled Waterno change0
Dish Washing Agentno change0
Bleachno change0
Approvals
Typical valuesThe listed technical data are typical values and give indications about the performance of the material only. They are not intended for specification purpose.
DisclaimerThe performance of the product should always be tested in the actual application conditions. Our recommendations are based on our most current knowledge and experience. As our products are used in conditions beyond our control, we cannot assume any liability for damage caused through their use. Users of our products are solely responsible that the product is suitable for its intended application, and have determined such at their sole discretion. Users must comply with any applicable legislation and/or testing requirements for the finished article, and are responsible for bringing their products to market. This publication does not constitute any warranty, express or implied, and is intended only for the recipient and cannot therefore be transferred to any third party. We cannot assume any liability for the use of our products in conjunction with other materials. All our products are sold subject to UPM Raflatac’s general sales conditions, and you should ensure that any existing laws are observed. This publication replaces all previous versions. All information is subject to change without notice.

 Product availability

ServiceWidth (mm) / Length (m)
Small roll1000/500
Stock1000/0
Stock1000/500

 Do you know our services?

 Components

 ‭(Hidden)‬ News

 ‭(Hidden)‬ Brochures

 ‭(Hidden)‬ Related materials